Wall Mount Brackets for PlayStation 4
These wall mount brackets consist of a left and a right part, allowing the PlayStation 4 to slide securely into the rails. There are two versions available:

Version 1 includes a spacer bar to help measure the correct distance during installation.
Version 2 features a crossbar that attaches to both brackets and connects in the middle for extra stability.
Both versions have a two-piece spacer or crossbar, making them compatible with most 3D printers.

You don’t need to print the crossbars if you are confident in measuring yourself. The required distance from outer edge to outer edge (right to left) should be 266-267 mm (10.47-10.51 inches).

Bambu Lab

Bambu P1S

No

Yes

,4

25%

ABS

3D Printing Recommendations
Print with at least 15% infill for sufficient strength.
Use 3 or 4 walls for more strength.
Ensure proper layer adhesion to prevent the brackets from breaking and the console from falling.
ABS is recommended for increased durability and strength.
For added security, consider installing a top bracket to prevent accidental pulling that could damage the mounts.