I designed this universal ws2812 LED mount, I needed something simple and easy to mount. The holes are designed for 2x1mm tiewraps. I only use 1 tiewrap per mount.

I use these at the front and sides for my Emax 250 nighthawk. I have a different solution for leds at the back.

I first soldered wires to the led-strips, then glued them to the mounts. I also applied some hot-glue to the wires, as these are a bit easy to break otherwise.

XYZprinting

da Vinci 1.0 Pro 3in1

No

No

0.2-0.3

70%

I printed this with 70% infill and 5mm brim.
I advice to use 70% or more infill, this will allow it to sustain some crashes. Mine did not break so far.