A little project I did while bored. This pc has 3 parts to it, the main pc, the graphics card, and the cover. The cover just snaps right in but might be loose depending on your settings but if you take advantage of the little holes on the side, a small chain should keep everything in place. This was originally made to be a bag charm but I think just a mini pc you can take apart and put back together is better. The graphics card fits perfectly in the slot and shouldn't be difficult to put in or take out.

Creality

Ender 3

25

Its a very easy print, I suggest you print with a cube pattern or triangle so the hollow pieces don't collapse while printing.

Quality:
Layer height: 0.2 mm

Walls:
Wall thickness: 0.8 mm
Wall line count: 2

Infill: anywhere from 25-50%

I used a temp of 240 degrees for the nozzle and a bed temp of a happy 64 degrees.

In the final photo there is an plexiglass piece, this is separate as it was made using a laser cutter.

If you want a DXF file to the cover, comment or dm me.