Summary

Dummy battery for powering, for example, the OM-D E-M10 Mark IV from an external power supply.
This replaces the BLS-50 battery and may therefore also support other OM-D and PEN cameras.

Besides the printed parts, you will need:

• 2× countersunk machine screws, e.g. M3×10 (DIN 965)
• 2× self-tapping screws, e.g. M2.5×6 mm
• 2× brass inserts, e.g. M3×6
• Some wire

Printing settings:

• 0.4 mm nozzle
• 0.2 mm layer height
• PLA or PETG should be fine