Compliant Raspberry Pi Zero W clamp (holder)
LoneRoam
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2021-04-26 11:41:56
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Summary
This design holds snuggly a Raspberry Pi Zero and Raspberry Pi Zero W. The mechanism is compliant (the prongs bend). I've uploaded two designs, one with the latches at the ends, to prevent it from falling out if you want to mount it upside down.
There is about 0.5mm clearance between the microSD and the base.
Print Settings
Printer:
FLSUN QQ-S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
10
Notes:
I've printed it with PETG, but it'll work just the same with PLA.
Modellquelle
Original-Link: Details anzeigen
CC BY