I used round stock as the base for this lamp, the round stock I used is 25mm. I included a tester so you can size up or down depending on what size stock you have on hand.

I printed the Lamp shade using "Spiralize Outer Contour" in Cura and superglued it to the socket.

Other parts you will need for this project is:
3x M5 nuts and bolts
1x lamp socket
1x light bulb
4x small screws (more if you want to screw all the individual parts)

Hope you like the design! :))

Doesn't Matter

Yes

0.2

30-50%