A low-profile (10mm high), foldable antenna for the Radiomaster Boxer with adequate design

To install that mod, you need to open the radio and unscrew the original antenna.

mount and mount-plug needs to be glued after mount to the holder inside radio.

You may use this instruction as a reference: 

Materials

• 1x Foxeer ELRS 2.4GHz Receiver Antenna 15.5mm (https://www.aliexpress.com/item/1005005506134248.html)
• 2x M3x6 button socket head cap screws
• 2x M3 washers
• extra-thin glue
• sandpaper (optional)
• 2.5mm drill (to fix a hole in the top part)

Print Settings

• Material: any (I printed with ASA)
• Infill: 100%
• Nozzle: 0.4mm
• Layer Height: 0.08mm
• Supports: manual (please refer to the attached picture)
• mount-bottom must be printed with 45 degrees