This is a modular headphone stand designed to be printed in parts and assembled with screws. If parts break, or you simply want to change the color of the print, parts can be easily replaced. Should fit most headphones, but an extra component is included which can be printed if the stand is too small.

19 M3x10mm screws required.

Recommended print settings:

Base: 40% infill. 0.3 Layer height
Sides: 50% infill. 0.3 Layer height
Base posts: 100% infill. 0.24 Layer height
Feet: 40% infill. 0.24 Layer height
Headphone post/ mount: 50% infill. 0.3 Layer height
Cable hook: 100% infill. 0.3 Layer height