This is a BIG coffee mug, around 12oz. It is loosely based on pottery recovered from the wreck of the Mary Rose.

Anycubic

All-metal Mega

No

Yes

.2mm

50

If you choose to print this mug, be sure to use a non-toxic, temperature resistant filament such as PETG.

The shape is pretty safe, though you may want to use support on the handle a bit. I used Cura to slice, Tree supports to prop the top and bottom overhangs on the handle.

Be sure to seal the mug with food safe epoxy or polyurethane to help plug any microscopic leaks and to discourage the growth of bacteria inside the print.

Do not add boiling water, such as for tea. 100C is over the glass transition point of PETG.