Key elements of my EDC are the Workpro 4" mini-pliers, 711L mini-ratchet, and the Steinwhale bits and extender. I wanted to hold them relatively compact and flat. These jigs seems to do the trick. The Workpro and 711L tool bodies are held side-by-side and the bit extender magnetically slips into the end of the ratchet. The bits are held in a separate storage block that fully covers the bits. The tool holder was printed standing vertically as shown in the picture in PLA with 0.25mm layers and organic supports under the cylindrical section. The bit holder was printed in clear TPU, also with 0.25mm layers.