Two piece print that when assembled, provides support and protection for 30mm Clear Pine External Corner Round Edge Moulding

Used in build of A2 overhead corner-LEDs lightbox - platform extension:
http://www.instructables.com/id/A2-overhead-corner-LEDs-lightbox-platform-extensio/

1. Print one of each part for each corner.
2. Drill out corner holes with 2mm drill bit.
3. Join pieces.
4. Insert 2mm wire ~33mm long (thin coat-hanger wire) into corner hole.
5. Countersunk holes may need to be hand/drill reamed.
6. Attach to Moulding with 3G x 10mm screws