I created this model to put an old microphone that I removed from an old, broken laptop. You can adjust it for different size microphones, inner diameter is 10 mm so if you have a different size mic, you can change size in slicer. Don't forget to change cap size too, and don't forget to put your cable thought cap before soldering :D

Recommended Settings

• 0.4 mm nozzle
• 0.2 mm layer height

Notes

• I used marble PLA with 0.8 mm nozzle for printing this model.
• It doesn't need to be detailed, so higher nozzle size and layer height will reduce print time.