Enter The Incredible Snowy Shoulder Pal (My first ever model)

This was my first ever time using Blender, so the model is quite simple :)

The Print is about 20-50 mins (depending on your printer) 

For this model YOU will need:

1.  TWO 5X2mm Magnets (link below)

2. A 3D printer

3. A jolly good Christmas spirit!

Link For the magnets:

https://www.amazon.co.uk/s?k=5x2+mm+magnets&crid=37WPPR8Y2RPQZ&sprefix=5x2+mm+magnets%2Caps%2C141&ref=nb_sb_noss_1

https://www.amazon.co.uk/Deryun-Magnets-Multi-Use-Refrigerator-Whiteboard/dp/B0CKX75W3D/ref=sr_1_18?crid=37WPPR8Y2RPQZ&dib=eyJ2IjoiMSJ9.Ra1JfzmqRYieid0u7ZRiWbl5-cXXCDKvpS7HNQ1GMBSLqLp_f322kS28GYUB9jXtzWpRXs5zYuZoKdIN28q-xzt6etJs9TkDXLBtkSwNM_Uuau-bYdYb4nmEvMf7ighEFaxrWyuvQxvmZCE-vSZ1FgwkWC9KsxTcOYfQZNX3KT2t-kEd8Lxv8rcsRnbgOy3epul2Mnmg05Ri97wGGLwPlWzlROGlyUGuMRtHr5zUiTrbl8Cs846oqchQIHWXtSZuCN_GjZpzsNtzyQhtKDxKS5Pxcr4PiIXrPBcPhlpnDdY.qNlXMPUjqkiIfq1EgidCkXmAtYzQRJAQSCadslLFeyY&dib_tag=se&keywords=5x2%2Bmm%2Bmagnets&qid=1765475399&sprefix=5x2%2Bmm%2Bmagnets%2Caps%2C141&sr=8-18&th=1

Print Settings:

Infill: 10-20% 

Supports: Tree

Everything else is your choice 

Feel free to remix and make your own