Designed for:
• Raspberry Pi Pico
• Waveshare SX1262 LoRa Node Module for Raspberry Pi Pico, LoRaWAN
o Part No.: Pico-LoRa-SX1262-915M (for US 915MHz)

Parts List:
• M3 x 30mm Hex Head Cap Screws - 4
• M3 Nuts - 4

Printed Parts:
• Material Recommendations:
o Case: PETG recommended for durability, PLA suitable for indoor use in non-heated environments.
o Feet: TPU used for flexibility, but can be substituted with other materials as preferred.
• Parts to Print:
o PicoMeshDesignBottom - 1
o PicoMeshDesignTop - 1
o PicoMeshDesignFoot - 4

Printing Notes:
• Supports: Supports were used for screw holes but might not be necessary. Experiment without supports if your printer allows for better precision in these areas.

HEADS UP!!!
• This is my first design and is quite rudimentary due to my current skill level. I created this because I couldn't find an existing case for this specific Meshtastic setup.
• Open for Improvements: I encourage anyone to remix this design. Feel free to enhance or modify it as I won't be making further updates myself due to limited availability of the hardware for testing.

Disclaimer:
• This design is functional but not optimized. Use at your own risk, especially in varied environmental conditions.

Feedback Welcome:
• If you make improvements or spot issues, please share your insights or remixes on Thingiverse!

Note:
• Ensure all printed parts fit together snugly. If parts are too tight, you might need to adjust your print settings or slightly sand the contact points.
• Check the alignment of the Raspberry Pi Pico and the LoRa module within the case for proper fit and functionality before final assembly.

Thank you for trying out my design, and happy tinkering!