This is an adapter so that you can use a standard photography cable release on a Polaroid Land Camera. It should work on any model of Land Camera, but it definitely works great on my 250.

You will need a steel nut that goes inside of the print. I am still working out the best thread pitch to match the standard cable release. Right now I'm using a standard 3/8" pitch nut, which is the same thread as a tripod mount. That works fine, but I've read that M4 might thread better, so this is still a work-in-progress.

I will also upload two versions when I'm done. One for embedding the nut into the print (if your printer has pausing capabilities), and one with an open bottom so that you can just superglue or epoxy the nut into the print.

Here's a gif of the cable release in action! http://i.imgur.com/QfxOQrb.gif

If you want to embed the nut into the print, pause the print before and insert the nut before that portion of the print finishes.

I will put specifics up about the nut soon.