Simple comb scraper for the dryer and other machines that have these condensers where dust gets trapped and needs to be cleaned. Just use this to scrape off the dust from the dryer condenser then vacuum all the loose dust. Will keep your dryer operating more efficiently. 

I have uploaded several versions so you should hopefully find one directly that should work. The name gives the important dimension of the comb. E.g. Dryer-comb-dust-cleaner_gap06_2.22mm.stl 

gap06 = 0.6 mm air gap between the combs

2.22mm = 2.22 mm between the two nearest air gaps 

Print with the seam at the rear that will give you clean combs. 

I printed and tested with 0.4 mm nozzle but should work even better with a 0.25 mm nozzle. 

Fo the Electrolux dryer I tested on you can use the gap06 and 2.22 version. 

Will use only 6.5 g of filament.

The files provided are for personal use at your own risk. I make no warranties, express or implied, regarding the safety, reliability, or suitability of any printed models. You are solely responsible for verifying that any downloaded design is safe, functional, and appropriate for your intended use, including but not limited to material choice, print settings, and post-processing. By downloading or using these files, you agree that I am not liable for any damages, failures, or consequences resulting from their use.