The idea was to make a fabric using a 3d printer.

For testing I made a small bag to store objects, pens, etc.

The clearance between the pieces is 0.2mm, so I suggest printing the 2x2 file to test your printer's tolerances.

Feel free to modify and create the model you want using the parts.

Please visit my profile to see my other models:
https://www.thingiverse.com/hmn3d/designs

Share my creations is the way I found to contribute and thank the help I've always had from the 3D printing community.

I'll try to keep the posts consistent, but if you'd like to help me out with a tip, please use the link below. Thanks!

Artillery Genius

No

No

0,2

15%

The biggest problem with the printed model's flexibility is the elephant's foot. Then adjust the first layer well and if necessary use the slicer's elephant foot feature.