Got a Blue Yeti USB mic from a tech event and it was missing its stand, so I decided to model something close to the original one. Took me a revision to dial down the thickness of the stand, but it now holds the mic well. 

The holes are tapped for M6 bolts on the mic body, and I had some M6x25 bolts laying around. I made a spacer for them which hides the screw head, and spaced them out 10mm. I also used the washers from the following model: 

https://www.thingiverse.com/thing:6914218 

Printed in PETG, 0.24mm layer height for the stand with tree supports and seam aligned to the back, and the washers at 0.16mm with ironing just to make them look nice :D (Both parts with 15% gyroid infill)

Let me know how it works for you all, and if there are any recommended changes for the overall design!

(also on thingiverse and makerworld) 
https://www.thingiverse.com/thing:7165660
https://makerworld.com/en/models/1867027-blue-yeti-usb-mic-stand#profileId-1997672