Table Power Outlet Housing

This 3D-printable table power outlet housing is designed specifically for DIY power sockets like the one linked below. It allows you to neatly mount a power outlet on or in a desk or table, with a clean and professional look.

The angled design provides easy access to plugs while keeping cables organized and out of sight. Ideal for desks, workspaces, hobby tables, and workbenches.

Compatible DIY Socket

This model is designed to fit the following DIY power socket modules:

• AliExpress DIY Socket:
  https://nl.aliexpress.com/item/1005005823390504.html

(Please verify dimensions before printing.)

Features

• Angled design for comfortable plug access

• Clean and minimal appearance

• Designed for DIY socket modules

• Suitable for desk or table mounting

• Rear/bottom cable exit

• Strong and sturdy construction

• Easy to modify for other socket sizes

Recommended Print Settings

• Material: PLA (PETG recommended for better heat resistance)

• Layer height: 0.2 mm

• Infill: 15–25% (Gyroid or Grid)

• Walls: 3–4 perimeters

• Supports: Required for the table mounting hole only

• Print orientation: Flat on the bottom

Assembly

1. Print all parts (enable supports for the table mounting hole)

2. Install the DIY socket into the housing

3. Route the power cable through the rear opening

4. Mount the housing on or in the table using screws

⚠ Warning: Working with mains voltage can be dangerous. Only install electrical components if you are qualified, or have the installation checked by a professional.

Customization

The model can easily be modified to support other DIY sockets or different table thicknesses. Remixes are welcome!