And a note these are double threaded so harder to work with. Drill one of each hole to easier to use. Just added 80mm bolt grips (I wanted to learn how to circular pattern a sketch). And I dropped it and one of the bolts snapped, I'm now printing the 80mm with 25%

Looks like thingiverse is having one of its off days. The STL files are there.

I've used these in the past while wood working (you can also use them with metal) while helping my mom build a bookcase/display case she didn't have any clamps, I refused to run a router for decorative work so I made her buy $40 worth of clamps. I also got into fusion 360 and drew these up. They are small and not intended to be fully functional the bolts are 80mm. the clamps are 80mmx20mmx20mm and I only printed them with 5% infill. The other bolt is printing now (hopefully I have enough filament to finish it) then will switch over to over to wood pla again and print the other clamp (30 min and 90min)

Scale for needs and adjust infill and walls. Use machine metric bolts from hardware store (8mmx1.25) for longer ones

Monoprice

Mini Delta

Yes

No

.2mm

5% go more for strenth and walls

I did rafts for both, but a must on the bolts printing higher up.