This piece represents Lumiere from 1991's Disney's animated movie Beauty and the Beast. The complete dimensions for Lumiere are the following (mm): Height- 335 Width- 240 Depth- 126 There are two versions available. In the first one, you will have holes in the candles for you to be able to use electric candles in them. In the second version, the candles have no holes in them, and the flames are included in the sculpture (to be painted, for example). UPDATE: Now, the file to print Lumiere in a single piece is also available. The electric candles used have the following dimensions (flames are not included in these dimensions since they should be above the hole for full effect): Height- 28 mm Diameter- 36 mm DISCLAIMER: Do not use real candles due to fire hazards. Sculpting software used : Blender Render method used for the previews: Cycles Filament: PLA Slicer used to 3D print: Ultimaker Cura Settings I've used to 3D print: Standard quality - 0.2mm Infill - 20% Supports - I've only used supports for Lumiere's nose. The rest should be safe enough to print without them. Speed - 50% first 20 layers and 100% for the rest Plate Adhesion - Skirt Cooling - Enabled Travel - Retraction Enabled