Hand or mud guard for an Arctic Cat ATV or similar, optionally with the cat logo on the bottom part. Designed for easy printing. The shield is divided in a lower and an upper part that is glued together after printing. Brackets can be tightened to the guard with two 10-12 mm metal or wood screws but can be glued in place.
Made for 22 mm handle bar

Print brackets solid.
Shield can be optimized after your liking.

What you need:

• PETG or similar
• 4 x M4 screws 50 mm length (or Imperial #8, 2 inches)
• 8 washers
• 4 nuts
• Optionally 4 wood/metal screws 10-12 mm length (half inch)
• Super epoxy
• Two or three metal clamps for the glueing phase

Creality

CR-10S

No

No

200

50