After having my inkjet printer in storage for a couple of years the continuous ink tubes developed air bubbles that I wanted to remove using the vacuum method. This little pump has enough volume to do the job in a single stroke.

The printed parts are a nozzle, plunger, rear guide, and a handle.

Other than the printed parts you will also need a couple of O rings (for the nozzle and plunger), some 6.35mm or 1/4" aluminium rod, and some DN20 PVC water pipe. I got all of these from Bunnings so should be easy enough for anyone to get.

Parts are glued together using quick set epoxy and before use a light spay of dry lube should help keep friction down.

Prusa

Prusa Clone

No

Yes

0.25mm Layer Height

30%

If the prints are porous then seal them by painting with epoxy or similar. Hint - nail polish works a charm but take care the wife doesn't find out...