I use alot of shopping bags as garbage bins, so I made this so I can hang them on doors and the like. The top edge is tapered and designed around fitting into the 3m command adhesive hooks. Look at the photo's for how to put the shopping bag in, but its pretty straight forward.

Depending on the size of your shopping bag, you might want to scale it in the z direction

In order to make it:

1. Print both left and right stl's
2. On one side, insert some 1.75mm filament in the holes in the arms of the print
3. glue the filament in place
4. Join the left and right using the filament as the joiner between the two sides
5. glue a bit more.
6. hang on a wall using some form of hook from the top of the print

In one of the images you can see mine hanging by only one hook, but in reality its better to use two, both for strength and to keep it straight. The pictures show a previous version that doesn't have a strut to help with the weight of the garbage, so the version on thingiverse is actually quite a bit beefed up for handling extra weight.

Modified Mendel 90

Doesn't Matter

No

0.2 is what i printed at

25% or geater

Make sure to give it a reasonable numberre of perimeters - I used 8.

The thing is designed in FreeCAD and i've uploaded the freecad file, feel free to modiffy to your liking!