I needed a hard case for my small FPV drones, so I designed one. It should work great for scale models, RC models and other small stuff. Since everything si 3d printed you can just scale every part to any size you need, the only limitation will be your printer print volume. Biggest part is 280mm long, I used a 300mmx300mm 3d printer to print it, if you have a 220mm printer you should scale all parts to 74% to make it fit, or you can slice the big parts using mesh mixer. All parts are 3d printable, no extra hardware needed. Two versions of each cover included, 2 parts and full. 2 parts is to save filament and time because if does not use supports, but both parts need to be glued together, I use cyanoacrylate to glue them. Here is the link to a 3d interactive model to see how everything fits together, should be straight forward to assemble. https://a360.co/3BPr11T pass: guaro3d Note: Purchasers cannot distribute or sell, neither the digital design nor the printed items made from the design. Buying this design gives you a non-exclusive agreement to print it in your own printer and for your own use, UNLESS you have a separate business or commercial agreement with me, the copyright author of the design. Contact me at: [email protected]