This is a new version of the A.M.V.P Mk. V code name: Okapi. This version prints horizontally, like the Mk.3 and Mk.4, it also looks more like the others if unfished/unpainted. The only deference between this version of the Mk.5 and the Mk.4, is the Hull Top, and the addition of the remote turret, all the other parts and files are the same. The Hull Top is the only part that needs a support structure or raft. There is no connection between the Remote Turret and the secondary turret mount on the hull. I drilled out the holes to 3mm "only because that was the diameter of the magnets", I used the magnets to connect them, metal or plastic tubing will work also.  there are two types of turrets included, only one is needed for a complete model. The Hull Top and Hull Bottom fit better as well. No file for axles yet, I didn't have much luck printing them, brass or aluminum tubing seamed to work a lot better. 3/16th or 4.76mm diameter tube works well, 1 3/8in. or 3.5cm is the length. Some drilling and/or filling/sanding on the Hull Bottom where the axles go will definitely help it roll more freely.