Another wall mount phone holder design for Portrait or Landscape use.

Fits a cellphone with 12mm thickness or less.

Print the 3 parts and conect them. There is a 0.3mm gap in the link. May or may not need superglue, depending on your printer tolerances.

Enable supports for the Left and Right arms, so the links will be printed ok.

You'll need a piece of double-sided 3M tape to stick it into your wall surface !

I've removed the Minibot logo from the released STL files.

I've printed the red in PLA and bronw in ABS.
0.3mm nozzle 0.15mm layer
2h print time