A set of 7 coasters I modelled using inspiration from the Dharma Initiative, from the TV show Lost.

Included files:
1 Coaster Box main body
1 Coaster Box Lid
7 Coasters: 1 Dharma Initiative logo, and 6 Dharma Initiative station logos (The Swan, The Orchid, The Flame, The Looking Glass, The Hydra, and The Lamp Post)

I recommend printing the main body in a standing orientation, as in the included photo. This makes the print take a little longer, but it ensures the coaster slots print in the best quality possible, without use of supports or having any bridging droop.

I haven't had any problems with heat from a cup of coffee using PLA+ yet, but use caution with hot drinks, if printing in any kind of PLA.

If you plan on using hot drinks with these, consider printing in ABS or PETG.

Mid print color changes from white to black are required on every coaster and the Box Lid. I used PrusaSlicer to do this, but use whichever slicer suits you.

The numbers on the base of the Main Body are colored black with either paint or a sharpie brush

Prusa

I3 MK3S

No

No

0.2

15

No supports needed, if printed in correct orientation (see photo)

Printed in PLA+ 15% infill

Color change from black to white mid print on every coaster & Box Lid