A DIY printable stand for your adafruit USB microscope.

You need a little peace of plywood for your stand and some epoxy glue. ( JB Weld is good for the job !)

You must glue top and bottom printed parts to the 8mm rod for a good rigidity.
File end of 8mm rod to make a square and glue it to the original microscope mount.

Needed parts:

M6 threaded rod
8mm rod
2 M6 nilstop nuts
1 M6 nuts
2 screws
A little peace of plywood and a piece of wood.

Enjoy with your high accuracy microscope !