This is a clone of the Mobeartec button box. (i based it on pictures and dimensions so it is not perfectly the same)
Mount the button box with Vesa 100 or with M6 bolts.
Glue the halfs together with super glue and tighten the bolts at the back to put it together. I used insert nuts in the front plates. You can easily put them in place with a soldering iron.
I used an Arduino Mega and Simhub for the code and the scheme for the electronics.
The holes for the small toggle switches and encoders are smaller so you can buy other part if you want. You have to bore them out.
I also created a sticker to download.
This are the parts i used.
7 rotary encoders https://nl.aliexpress.com/item/32790788377.html?spm=a2g0s.9042311.0.0.27424c4dT2YK1b
2 switch buttons https://nl.aliexpress.com/item/32859201158.html?spm=a2g0s.9042311.0.0.27424c4dT2YK1b
22mm push button https://nl.aliexpress.com/item/4001148756697.html?spm=a2g0s.9042311.0.0.27424c4dT2YK1b
5 toggle switches (not super happy with those) https://nl.aliexpress.com/item/4000177976189.html?spm=a2g0s.9042311.0.0.27424c4dT2YK1b
corner angled usb cable
https://nl.aliexpress.com/item/4000342045737.html?spm=a2g0s.9042311.0.0.27424c4dT2YK1b15 push buttons 12mm https://nl.aliexpress.com/item/4000431419954.html?spm=a2g0s.9042311.0.0.27424c4dbcZtsz
Arduino cables https://nl.aliexpress.com/item/33010611220.html?spm=a2g0s.9042311.0.0.27424c4dnkA8jg
4 Cover knobs rotory encoder https://nl.aliexpress.com/item/32971261824.html?spm=a2g0s.9042311.0.0.27424c4d7kbe5t
2 Cover knobs rotory encoder 23mm https://nl.aliexpress.com/item/4000077927991.html?spm=a2g0s.9042311.0.0.27424c4dOpfPvW
1 Cover knobs rotory encoder 44,5mm https://nl.aliexpress.com/item/4000077927991.html?spm=a2g0s.9042311.0.0.27424c4dOpfPvW
12 M3 insurt nuts https://nl.aliexpress.com/item/4000585933306.html?spm=a2g0s.9042311.0.0.27424c4dOpfPvW
- 4 M6 insurt nuts https://nl.aliexpress.com/item/4000585933306.html?spm=a2g0s.9042311.0.0.27424c4dOpfPvW
.
Modellquelle
