Have you ever zip-tied a cable into a looped bundle, but then later realized you wanted to undo a few loops because you didn't tie it to the right length?

This part allows you to do that. This one fits a Cat5 UTP cable snugly. The default cord thickness is 5.62mm

20mm prongs: taper at 2.50 deg.
30mm prongs: taper at 2.00 deg.
40mm prongs: taper at 1.75 deg.

If you need to wrap a different cord, open the link to the Onshape document: there are parameters for cord thickness, prong length, depth, prong_taper_angle, etc.

https://cad.onshape.com/documents/eeda8be48d107f289d5cd22c/w/ff42084eb3d76d845ec9f54f/e/86a0a82d9be7f1536ea92b0c?renderMode=0&uiState=63a695fb4712bc5b146e393a