Project: Spiderman.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 127.35x180mm in size

 You may print at higher layer heights below the Base Thickness of 0.48mm

 The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used: (* = Owned)

#080a0d  PLA PolyLite Black Transmission Distance: 0.3

#4c5f71  PLA BambuLab Basic Blue Gray Transmission Distance: 4

#8c9099  PLA PolyLite Grey Transmission Distance: 1

#e2dedb  PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Blue Gray

At layer #13 (1.12mm) swap to Grey

At layer #22 (1.84mm) swap to White for the rest.