Project: arturo.hfp

Print with 100% infill, layer height of 0.08 mm, and base layer of 0.16 mm

The dimensions of this model are

200x200mm. You can use it with a thickness of less than 0.48mm.

Print at a higher layer height. The maximum depth is 2.2mm, and the actual depth is 2.2mm.

The filament used:

PLA Smartfil Black, transmission distance: 0.4

PLA smart film White, transmission distance: 6

This print uses 2 unique filaments

Exchange instructions:

Starting from black, exchange the rest of the parts for white on the #10 layer