Model sharing. Please contact us to delete it if it infringes on others' rights

Thank you for visiting!

Trying different variations of flags and I thought this one really stood out to me. Hope you enjoy it.

They come out quite thick, so it has a nice texture to it.

If you resize the model, make sure you DO NOT scale the Z axis, otherwise the print colors will not be in the same position.

Print with a 15% infill at a layer height of 0.08mm, with a base layer of 0.16mm.

Filaments Used:

PLA HueForge Navy Blue 1.3 Transmission Distance: 8

PLA BambuLab Matte Dark Red Transmission Distance: 1.5

PETG JAYO White Transmission Distance: 6

Swap Instructions:

Start with Navy Blue 1.3

At layer #10 (0.88mm), switch to Dark Red.

At layer #15 (1.28mm), switch to White for the rest.