Project: Mbappe.hfp

Print with 100% infill, layer height of 0.08 mm, and base layer of 0.16 mm

The dimensions of this model are

112.5x200mm, you can make it with a thickness of less than 0.48mm.

Print at a higher layer height, with a maximum depth of 2.2mm, and an actual depth of 2.2mm.

The filament used:

PLA Smartfil Black, transmission distance: 0.4

PLA smartfil brown, transmission distance: 5

PLA BambuLab Basic Yellow, transmission distance: 6

PLA smart film White, transmission distance: 6

This print uses 4 unique filaments

Exchange instructions:

From black people

Start exchanging to maroon on the #13 layer

Switch to yellow at layer #16

On the #19 layer