Needed bigger under desk drawers with no handles. Too many charging cables to store :)

They are pretty sturdy, reasonably deep at 45mm and with the handle on the base of the drawer.

Just screw the frame into the desk using the four pre made holes. The frame is quite thick at 5mm, but don't over tighten, just till the head is flush with the frame. ( i used 6mm diameter Countersunk head screws at 20mm)

There are two sizes :-

Under Desk Drawer 75mm which is 75mm wide x 150mm length x 45mm Depth.

Under Desk Drawer 150mm which is 150mm wide x 150mm length x 45mm Depth.

Easy to print with no supports needed. All files already orientated for printing.

added a 180mm long version to fit your average pen / pencil in.