halftone face hueforge

3D Print Instructions

---------------------

Layer height: 0.020 mm

First layer height: 0.200 mm

Recommended: Layer loops: 1; Infill: 100%

Start with color: #ffffff

Color swap plan:

1. Start with #ffffff

2. Swap to #bababa at layer 1 (~0.200 mm)

3. Swap to #858585 at layer 32 (~0.800 mm)

4. Swap to #676767 at layer 42 (~1.020 mm)

5. Swap to #414141 at layer 56 (~1.300 mm)

6. Swap to #000000 at layer 73 (~1.640 mm)

Notes: Heights are approximate. Confirm in slicer before printing.

---------------------

Made by rezzad