Albert Einstein hueforge

3D Print Instructions

---------------------

Layer height: 0.020 mm

First layer height: 0.500 mm

Recommended: Layer loops: 1; Infill: 100%

Start with color: #d7cebd

Color swap plan:

1. Start with #d7cebd

2. Swap to #e5e6e0 at layer 26 (~1.000 mm)

3. Swap to #305465 at layer 33 (~1.120 mm)

4. Swap to #9d8055 at layer 39 (~1.240 mm)

5. Swap to #c59d58 at layer 45 (~1.360 mm)

6. Swap to #110c08 at layer 51 (~1.480 mm)

Notes: Heights are approximate. Confirm in slicer before printing.

---------------------

Made by rezzad