If you come looking here you probably know that those super-tiny buttons on the XIAO ESP32C6 are impossible to press for human hands. This clip-on cover solves that, it gives a nice area to push on with a good tactile response.

Optionally this can be printed in two colors (split objects in the slicer) to add a different-color blob on the reset button.

The LEDs are still visible through the gaps around the buttons.

This is not intended as case, as you can see the bottom is open. But it does work well with bread boards etc.

Tip for removal: plug in a USB connector, then gently push the clip back a bit and use the USB connector to angle the board out.

The Onshape model is here: https://cad.onshape.com/documents/c4d4946225c59f2348200801/w/8dc38b5f1bf3bc513006b959/e/3cb78726f60ef2fef549cd0b?renderMode=0&uiState=6988adefe6283b9ac7733267