CR7 color gradient

Print with a 100% fill rate, a layer height of 0.08 mm, and a base layer height of 0.16 mm

The model size is 100x100mm.
You can use a higher layer height for printing at a minimum depth of 0.48mm or less.
The maximum depth is 2.2mm, and the actual depth is 1.7mm.

Consumables used:
PolyLite black PLA, transmission distance: 0.3
BambuLab Basic Grey PLA, transmission distance: 2
BambuLab Basic Orange PLA, transmission distance: 7
BambuLab Basic Jade White PLA, transmission distance: 5
This printer uses four unique consumables.

Switching instructions:
Start with black
Switch to gray on the 9th layer (0.8mm)
Switch to orange on the 11th layer (0.96mm)
Switch to jade white on the 14th layer (1.2mm) until the printing is finished.