Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x125mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm

Filaments Used:
PLA PolyLite White Transmission Distance: 5
PLA BambuLab Basic Pink Transmission Distance: 8
PLA sunlu black Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with White
At layer #8 (0.72mm) swap to Pink
At layer #11 (0.96mm) swap to black for the rest.