Mini version of Captain America.hfp
Print with a base layer height of 0.16mm and a layer height of 0.08mm, with a fill rate of 100%

The model size is 150x186.95mm.
You can print with a higher layer height at a minimum depth of 0.48mm or less
The maximum depth is 3mm, and the actual depth is 3.1mm.

Consumables used:
PLA Smartfil Black, transmission distance: 0.4
PLA Smartfil Red, transmission distance: 2.3
PLA BambuLab Basic Blue-Grey. Transmission distance: 3
PLA Smartfil flesh-colored filament. Transmission distance: 1.6 meters.
PLA smartfil white, transmission distance: 6
PLA Smartfil Brown, transmission distance: 5
PLA Smartfil Deep Blue. Transmission distance: 3
This print uses 7 unique consumables

Exchange instructions:
Starting with black
Change it to red on the 9th layer
Change it to blue-gray on the 15th layer
Change it to red on the 16th layer
Change it to flesh color on the 17th layer
Change it to white on the 22nd layer
Change it to brown on the 23rd layer
Change it to dark blue on the 25th layer
Change to white on the 27th layer

Mini version of Captain America.hfp
Print with a base layer height of 0.16mm and a layer height of 0.08mm, with a fill rate of 100%

The model size is 150x186.95mm.
You can print with a higher layer height at a minimum depth of 0.48mm or less
The maximum depth is 3mm, and the actual depth is 3.1mm.

Consumables used:
PLA Smartfil Black, transmission distance: 0.4
PLA Smartfil Red, transmission distance: 2.3
PLA BambuLab Basic Blue-Grey. Transmission distance: 3
PLA Smartfil flesh-colored filament. Transmission distance: 1.6
PLA smartfil white, transmission distance: 6
PLA Smartfil Brown, transmission distance: 5
PLA smartfil deep blue. Transmission distance: 3
This print uses 7 unique consumables

Exchange instructions:
It all started with black
Change it to red on the 9th layer
Change it to blue-grey on the 15th layer
Change it to red on the 16th layer
Change it to flesh color on the 17th layer
Change it to white on the 22nd layer
Change it to brown on the 23rd layer
Change it to dark blue on the 25th layer
Change to white on the 27th layer