Project: nami19.hfp
Print with a 100% fill rate, a layer height of 0.08 mm, and a base layer height of 0.16 mm

The model size is 107x160mm.
You can use a higher layer height for printing at a minimum depth of less than 0.48mm
The maximum depth is 2.2mm, and the actual depth is 2.2mm.

Consumables used:
PLA PolyLite, black. Transmission distance: 0.3
BambuLab PLA Basic, red. Transmission distance: 5
BambuLab PLA Basic, brown, light transmission distance: 2
BambuLab PLA Basic, Orange. Transmission distance: 7
BambuLab PLA Matte Cherry Blossom Pink. Transmission distance: 3
BambuLab PLA Basic, Beige. Transmission distance: 8
BambuLab PLA Basic, jade white. Transmission distance: 5
This printer uses 7 unique consumables

Switching instructions:
Starting with black
Switch to red at the 9th layer
Switch to brown at the 12th layer
Switch to orange at the 16th layer
Switch to cherry blossom pink at the 22nd layer
Switch to beige at the 23rd layer
Switch to jade white at the 24th layer