Print with a 0.6mm nozzle, and you can get more details by using a 0.4mm nozzle

Use a layer height of 0.18mm and a base layer height of 0.24mm for 100% infill printing
You can print with a higher layer height below the minimum layer height of 0.24mm.
The maximum floor height is 3.1mm, and the actual floor height is 3.1mm

The consumables I use:
Black PLA Kingroon
Red PLA Kingroon
Lemon Yellow Matte PLA from BambuLab
White PLA from Kingroon

Replacement instructions:
Starting with black
Switch to red on the fourth layer
Switch to lemon yellow on the 9th layer
Switch to white on the 14th layer

I'm happy to accept the request and try to experiment with AI art and AMS