Pegboard holder for a generic set of 32 Feeler Guages, compatible with standard 1" x ¼" hole pegboard. The opening is 16x16mm (with 1mm corner fillets) and 40mm deep.

This uses Sy's Peglock System:

1. Print 1 piece of the board attachment peg from here, in PETG at 100% infill, for best strength.
2. The holder, sy-peglock-feeler-gauges.stl, may be printed in PLA.
3. Fold the peg over on itself and insert into the pegboard.
4. Slide the holder onto the peg from above