Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 190x60mm in size

You may print at higher layer heights below the Min Depth of 1.3mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
This print uses 3 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #18 (1.52mm) swap to Ivory White
    At layer #25 (2.08mm) swap to Scarlet Red for the rest.