Captain Pug was created and shared as Public Domain by Knee97 without a print profile.  I've just made a printable profile for this cool model.  I chose to print it at 50% scale, as the default size was a bit big for my liking - adjust the scaling to suit your purposes.   Note that I used the Supertack print bed, but you can print it on whatever bed you want.   The model only takes 1 hour 20 minutes to print, if you're patient, you might try it using a 0.2 mm nozzle to further reduce the layer lines.    I'm no expert on Support settings - it will take some work to remove the supports,  be careful not to break off an ear in the process.   The last photo is a suggestion for painting it. When I get around to painting it, I'll add more pics.