debugging

debugging use only
MGS Mount plated with idler, body and groove mount from i3 prusa

plate sliced with simple-mode branch (correct appearance)

generated by Slic3r 0.9.8-dev on Thu Jan 17 08:32:37 2013

bottom_solid_layers = 3
bridge_flow_ratio = 1
bridge_speed = 30
brim_width = 0
complete_objects = 0
external_perimeter_speed = 100%
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = .15
fill_pattern = honeycomb
first_layer_extrusion_width = 200%
first_layer_height = 0.4
first_layer_speed = 30%
gap_fill_speed = 20
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_speed = 60
layer_height = 0.4
min_skirt_length = 0
notes =
only_retract_when_crossing_perimeters = 0
output_filename_format = [input_filename_base].gcode
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 3
post_process =
randomize_start = 1
skirt_distance = 2
skirt_height = 1
skirts = 1
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_speed = 60
support_material =
support_material_angle = 45
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 45
threads = 2
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 80

generated by Slic3r 0.9.8-dev on Thu Jan 17 08:32:44 2013

bed_size = 200,200
end_gcode = G91 ; relative mode\nG1 E-4 ; retract 4mm\nG90 ; absolute mode\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG1 X30 ; home X to 30\nM84 ; disable motors
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode =
nozzle_diameter = 0.5
print_center = 100,100
retract_before_travel = 2
retract_length = 0.8
retract_length_toolchange = 3
retract_lift = 0.4
retract_restart_extra = .1
retract_restart_extra_toolchange = 0
retract_speed = 25
start_gcode =
toolchange_gcode =
use_relative_e_distances = 0
vibration_limit = 0
z_offset = 0

generated by Slic3r 0.9.8-dev on Thu Jan 17 08:32:41 2013

bed_temperature = 95
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on =
fan_below_layer_time = 30
filament_diameter = 3
first_layer_bed_temperature = 95
first_layer_temperature = 235
max_fan_speed = 50
min_fan_speed = 40
min_print_speed = 10
slowdown_below_layer_time = 15
temperature = 235

plate sliced with master branch

generated by Slic3r 0.9.8-dev on Fri Jan 18 08:46:17 2013

bottom_solid_layers = 3
bridge_flow_ratio = 1
bridge_speed = 30
brim_width = 0
complete_objects = 0
external_perimeter_speed = 100%
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = .15
fill_pattern = honeycomb
first_layer_extrusion_width = 180%
first_layer_height = 0.4
first_layer_speed = 30%
gap_fill_speed = 20
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_speed = 60
layer_height = 0.4
min_skirt_length = 0
notes =
only_retract_when_crossing_perimeters = 0
output_filename_format = [input_filename_base].gcode
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 3
post_process =
randomize_start = 1
skirt_distance = 2
skirt_height = 1
skirts = 1
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_speed = 60
support_material =
support_material_angle = 45
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 45
threads = 2
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 80

generated by Slic3r 0.9.8-dev on Fri Jan 18 08:46:23 2013

bed_size = 200,200
end_gcode = G91 ; relative mode\nG1 E-4 ; retract 4mm\nG90 ; absolute mode\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG1 X30 ; home X to 30\nM84 ; disable motors
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode =
nozzle_diameter = 0.5
print_center = 100,100
retract_before_travel = 2
retract_length = 0.8
retract_length_toolchange = 3
retract_lift = 0.4
retract_restart_extra = .1
retract_restart_extra_toolchange = 0
retract_speed = 25
start_gcode =
toolchange_gcode =
use_relative_e_distances = 0
vibration_limit = 0
z_offset = 0

generated by Slic3r 0.9.8-dev on Fri Jan 18 08:46:20 2013

bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on =
fan_below_layer_time = 30
filament_diameter = 3
first_layer_bed_temperature = 105
first_layer_temperature = 235
max_fan_speed = 50
min_fan_speed = 40
min_print_speed = 10
slowdown_below_layer_time = 15
temperature = 235