This is a collaborative design of my granddaughter and me. She is taking 3d graphic design in high school and is just in the beginning design phase. She wanted to create a Dinosaur cup holder so I told her give me a sketch of what she was wanting and I would see what I could do with it. I've uploaded the sketch I was working with and pictures of the final result of the project. I thought it would be a good time to try out the Anylab picture to 3d print conversion AI and see what it could do. I was surprised that it did so well as I had tried it on the Bambu Lab picture to 3d file converter and the results were less than acceptable. So good job Anycubic on your anylab products. OK, this was printed in PETG. It is a 4 Color print. I chose green, white, black, and yellow. You may have other color schemes that are more to your taste so go for it. The nozzle temp was set to 245 and the bed temp to 75. This print in full color took a little over 21 hours. Infill of 10% is fine for this.