I wanted to upgrade the look of my Epax X1, so I made a new nameplate.

I used two 3x8mm magnets to attach it to the frame and some permanent marker for the color.

It prints in about 15 minutes, depending on your printer and layer height.

The STL seems large, but will fit on your X1 screen, no problem. This is designed to print flat on the bed, so don't waste your time supporting this.

I also uploaded a file with just the logo if you wanted use tape or glue or come up with your own mount.

I also uploaded the STP file so you should be able to adapt this to most any Epax printer. Have fun!

Print Settings

Printer:

Epax X1

Rafts:

Supports:

No

Resolution:

Infill:

20

Filament:

Epax resin resin

grey

Category: 3D Printing